名称：威振嘉免钉胶

Name：Weizhenjia nail free glue

品牌：威振嘉

Brand: Weizhenjia

净含量: 300ml

Volume: 300ml

装箱规格: 24支/箱

Packing specification: 24pcs/carton

27℃以下，原装密封储存期为一年

Below 27℃, original sealed storage period is one year

颜色：多色，可根据客户要求定制

Color: Multicolor， can be customized according to customer requirements

毛重:透明色:300-320g

其他颜色:420-460g

Gross weight:clear:300-320g

other colors:420-460g

纸箱外包装尺寸：

规格一：长30cm × 宽20cm × 高25cm

规格二：长25cm × 宽25cm × 高25cm

Carton package size:

Specification 1: L 30cm × W20cm × H 25cm

Specification 2: L 25cm × W 25cm × H 25cm

产品特点:

环保无异味，粘结力强且持久，可粘结大部分材料,能防水，柔韧性好，不脆化，不会因为建筑物的收缩移动而影响粘附力。

Product feature:

Eco-friendly odorless, strong gluing and long-time lasting, it can bond all materials and is waterproof.，good flexibility, no embrittlement, and no influence on adhesion due to shrinkage and movement of buildings.

应用范围：

是一种能够替代钉子的无钉胶粘剂，可用于固定和粘接木材、中密度纤维板、石膏板、石材、混凝土、金属、塑料、橡胶、钢材、PVC板木材，硬质塑料，镜子，厨房卫生间挂件等安装工程,木材,踢脚线、画框、木地板、 照片墙、背景墙、门框、桌椅等。

Application:

It is a nail-free adhesive that can replace nails, which can be used to fix and bond wood, medium density fiberboard, gypsum board, stone, concrete, metal, plastic, rubber, steel, PVC board wood, hard plastic, mirror, installation of kitchen and bathroom accessories, wood, skirting lines, picture frames, wooden floors, photo walls, background walls, door frames, tables and chairs, etc.

主要用途：

室内外广告安装

背景墙安装

五金金属配件

天花吊顶灯

门窗橱柜安装

镜子，厨房卫生间挂件

Main uses:

Indoor and outdoor advertising installation

Background wall installation

Hardware metal fittings

Ceiling light

Door and window cabinet installation

Mirror, installation of kitchen and bathroom accessories,

Packing:
300ml/pc, 24pcs/ctn

包装：300毫升/支，24支/箱

Advantage:
1. Strong bonding property, high bonding strength;
2. High flexibility, bonding power not affected by shrink of building;
3. Wide application range, suitable for most of materials

4. Suitable for filling gaps, cracks;
5. Excellent weathering-resistance, water-proof property;
6. Non-toxic, no pollution, free of hazardous substances like benzene, formaldehyde, etc.

优点：

1粘结性强，粘结强度高；

2柔韧性高，粘结力不受建筑物收缩的影响；

3适用范围广，适用于大多数材料；

4可适用于填补缝隙、裂缝；

5优良的耐候性、防水性能；

6无毒、无污染，不含苯、甲醛等有害物质。

Using Method:
1. Surface preparation: Bonding surface should be clean and free of dust and rust.
2.---Dry Bonding: (suitable for light materials & joints for light pressure)
Squeeze out the adhesive in form of "Z" ,line distance about 40cm. Apply to material A, then press to bonding area B lightly, wait for a few minutes about 5~8 minutes, then press the two surfaces with strong pressure.
 ---Wet Bonding: (Suitable for heavy materials)
Apply the adhesive same way as above, then clamp or fasten up the two materials by tools like pliers, screws to maintain maximum surface contact at bonded interfaces. Fix and wait for 24 hours till the adhesive dries, then remove the fixing tools. The adhesive is movable within 20 minutes since bonding, becomes stronger 2~3 days after bonding, reaches best performance till 7 days.

使用方法：

1表面处理：粘接表面应清洁，无灰尘和铁锈。

2---干粘合：（适用于轻材料和轻压力接头）

以“Z”形挤出胶粘剂，线距约40cm。涂于材料A上，然后轻压至粘合区域B，等待几分钟约5~8分钟，然后用强力按压两个表面。

---湿粘合：（适用于重型材料）

按上述方法涂上粘合剂，然后用钳子、螺钉等工具夹住或紧固两种材料，以保持粘合界面的最大表面接触。固定并等待24小时，直到粘合剂干燥，然后取下固定工具。胶接后20分钟内可移动，胶接后2～3天强度增强，7天达到最佳性能。

Notes:
Please try small quantity before massive use.
Before adhesive hardens, it can be removed with turpentine.
After adhesive dries, it can be removed by scrape or rubbing.
Adhesion power will be weakened under high temperature. Avoid bonding metal exposed to sunshine for long time.
注意：

大量使用前请先少量试用。

在粘合剂变硬之前，可以用松节油将其除去。

粘合剂干燥后，可通过刮擦或摩擦去除。

高温会使附着力减弱。避免粘合金属长时间暴露在阳光下。