产品展示
/
/
/
868威振嘉酸性快干玻璃胶 868 Weizhenjia Acidic Quick-drying Glass Adhesive
IMG_7900
IMG_7901
IMG_7902
IMG_7906
IMG_8819
12
22
IMG_7900
IMG_7901
IMG_7902
IMG_7906
IMG_8819
12
22
  • 868威振嘉酸性快干玻璃胶 868 Weizhenjia Acidic Quick-drying Glass Adhesive

  • 联系我们
产品描述

名称:868威振嘉酸性快干玻璃胶

Name: 868 Weizhenjia Acidic Quick-drying Glass Adhesive

 

品牌:威振嘉

Brand: Weizhenjia

 

净含: 300ml

Volume: 300ml

 

装箱规格: 24/

Packing specification: 24pcs/carton

 

温度27℃以下,原装密封储存期为9 个月

Temperature is below 27, original sealed storage period is 9 months

 

颜色:多色,可根据客户要求定制

Color: Multicolorcan be customized according to customer requirements

 

毛重:透明色:300-320g

其他颜色:420-460g

Gross weight:clear:300-320g

other colors:420-460g

 

执行标准:GB/T14683-2003

Executive standard: GB/T14683-2003

 

纸箱外包装尺寸:

规格一:长30cm × 20cm × 24cm

规格二:长25cm × 25cm × 24cm

Carton package size:

Specification 1: L 30cm × W20cm × H 24cm

Specification 2: L 25cm × W 25cm × H 24cm

特点:醋酸固化,高性能,防风防水,耐腐蚀,环保无异味,具有永久性粘接,抗紫外线,与其他大多数建筑材料具有良好的粘接密封作用

Feature:Acetic cure high-performance,wind defense and waterproof,preventingcorrosion resistance, environmental protection, no odor, permanent bonding, UV resistancehaving a good bonding and sealing effect with most other building materials

 

用途:玻璃门,窗户,室内外家具安装粘接密封,金属,胶合板,填补各种建筑安装工程的缝隙密封,在大多数情况下不需要用底漆。

Application: bonding and sealing of glass doors, windows, indoor and outdoor furniture installation, plywood, filling the gaps and sealing of various construction and installation projects, no primer is needed in most cases

 

操作环境应该在-4℃-+40℃之间

The operating environment should be between -4°C and +40°C

 

使用说明:

使用前必须作粘结性和相溶性试验以确定产品是否满足需要,在施工及固化环境需保持空气流通;基材粘接表面必须清洁,干燥,无灰尘,油污,水份存在,可用干净不脱绒的棉布和去污的甲苯、二甲苯或丙酮进行清洁。

Instructions for use:

Before use, it is necessary to conduct a stand-off and compatibility test to determine whether the product meets the requirements. The construction and curing environment must maintain air circulation; the bonding surface of the substrate must be clean, dry, free of dust, oil, and moisture. It can be cleaned or not. Clean with lint-free cotton cloth and decontaminated toluene, xylene or acetone.

 

施工方法:

  • 施工时与结构胶接触的建材表面,必须清洁干燥。
  • 为确保硅酮结构胶周边线条完美整洁,可用胶带遮盖以保持接口外观整齐。
  • 切开管口,在均压下移动胶枪以确保接缝填满。
  • 用工具修整后,除去遮蔽带。
  • 若有残余胶料时,可用溶剂清除掉。

Construction method:

  • The surface of building materials in contact with structural glue during construction must be clean and dry.
  • In order to ensure that the surrounding lines of the silicone structural adhesive are perfect and tidy, it can be covered with tape to keep the appearance of the interface tidy.
  • Cut the nozzle and move the glue gun under equal pressure to ensure that the seam is filled.
  • After trimming with tools, remove the masking tape.
  • If there is residual rubber, it can be removed with solvent.

Sealant Package
300ml *24cartridges/carton

密封剂包装

300ml*24 /

 

Warning:
1.Use up once opened .Otherwise must seal the preservation strictly.
2. Avoids the skin or the eye contact, if contacts carelessly, uses the massive clear water to flush and to go see a doctor immediately.
3. When is been heavy by the cementation work piece or needs to move, in the solidification time needs the auxiliary means localization.
4. The working conditions maintain enough ventilate.

5.Keep away from children.

注意

1开封后用完,否则必须严格密封保存。

2避免皮肤或眼睛接触,如不慎接触,立即用大量清水冲洗并就医。

3当被胶结工件重或需要移动时,凝固时间内需要辅助手段定位。

4工作条件保持足够的通风。

5.远离儿童

Copyright © 广州威振嘉环保科技有限公司 备案号: 粤ICP备12022216号   【网站管理入口】

网站建设:中企动力  广州